The EcoBoost series first appeared with the launch of the MkVII in 2008. Primarily a city car, the Ford Fiesta also offers excellent handling on highways and motorways.
Ford Fiesta EcoBoost Specifications
A wide range of engine options
- By choosing the Fiesta EcoBoost, you have a choice of three very environmentally friendly engines that emit only 98 to 138 g of CO2 per km:
EcoBoost Petrol
- Based on a 1-liter 3-cylinder engine, it can deliver 182 horsepower. In addition to its power, this engine is also quite economical, with a combined fuel consumption of approximately 4 liters per 100 km.
EcoBoost Diesel
- For diesel options, you can choose from a 1.5-liter Bluediesel TDCi engine. Coupled with a 5-speed manual gearbox, the car can reach a top speed of 220 km/h and accelerates from 0 to 100 km/h in under 10 seconds.
Ecoboost Hybrid
The Ford Fiesta Ecoboost hybrid engine currently emits the least CO2 into the atmosphere. Its ultra-practical self-charging mode allows you to efficiently benefit from its electric motor.
A wide range of trim levels
In terms of trim levels, you have access to the base model. However, if you want more options, you can choose the Fiesta Cool & Connect, the Fiesta Titanium, or the Titanium X.
Unrivaled driving comfort
With its firm suspension and 2.490-meter wheelbase, the Ford Fiesta Ecoboost offers excellent driving comfort both in the city and on the outskirts. In addition, its fuel tank capacity allows it to cover long distances.
Ford Fiesta Ecoboost: Intelligent onboard systems
In terms of driver assistance systems, the Ford Fiesta EcoBoost features a camera coupled with rear parking sensors, intelligent mirrors and headlights, as well as various other options (adaptive cruise control, emergency braking, hill start assist, etc.). Also equipped with an on-board computer, the vehicle can easily connect to an OBD scanner, allowing you to diagnose the car’s condition at any time.
How much does the Ford Fiesta EcoBoost cost? A new base model Ford Fiesta EcoBoost costs around €14,500 at most. For other trim levels, the Fiesta Cool and Connect are offered at €16,500, while the Titanium and Titanium X are priced at €19,000 and €20,000 respectively.
-
Maxpeedingrods Wheel Fitment Testing Tool Tire Size Fit Test Measuring Mockup 5-Lug PatternIntroductionThis wheel fitment simulator tool is installed inside the tire and can simulate whether a fixed offset hub will fit into our car or measure the appropriate offset so that a new or custom hub can be ordered.Positive offset hubs are commonly used in front-drive and partially rear-drive models. Negative offset wheels are commonly used in suvs, premium sedans and sports cars. The wrong offset can cause the hub to interfere with the brake caliper, suspension, or body.Application5-lug wheel bolt pattern fitments include 5x4.5, 5x4.75, 5x5, and 5x5.5DimensionTool supports 14 to 22 inch wheel diameters and 7 to 17 inch wheel widths -
Perel Collomix - Turbine Pour Malaxeur - Type Wk - Ø 135 Mm - M14Multi-purpose stirrer with good material guidance, right-rotating, with two mixing paddles for less stress on the drive system, for adhesives and plastic materials such as tile adhesives, ready-mixed mortar and plaster, screed.Caractéristiques :Spécifications :model: WK 140 M - mixing volume: 25-35 kg - paddle Ø: 135 mm - longueur: 590 mm - min. size drill chuck: - - mixer connection: M14 - output: 1300 W -
Perel Collomix - Turbine Pour Malaxeur - Type Wk - Ø 90 Mm - 10 MmMulti-purpose stirrer with good material guidance, right-rotating, with two mixing paddles for less stress on the drive system, for adhesives and plastic materials such as tile adhesives, ready-mixed mortar and plaster, screed.Caractéristiques :Spécifications :model: WK 90/500 S - mixing volume: 7-10 kg - paddle Ø: 90 mm - length: 500 mm - min. size drill chuck: 10 mm - mixer connection: - - output: 700 W
